Protecting Property

Entrance doors – a popular and valid method for the security of their apartments, offices, villas and cottages. Undoubted advantage of a metal door is a fairly low cost, which is simply not commensurate with cost of service alarm or pay a watchman. But at the same time, Security door provide a high level of safety of your home, as illegally hack into it without special equipment almost impossible, which is often quite noisy. Even if the thief will use the most advanced technical capabilities, the crack front doors will take just a lot of time questioning the very idea of hacking door. Today production is able to provide you with different categories of metal doors. They differ in both appearance and production technology. Now try to evaluate them. More info: Chandra Patel.

Known for metal doors moisture-resistant construction. Such doors are often used as an external or used in the rooms, the relative humidity is more than 60protsentov. Usually, the doors of this type yet vandal. Method staining of these doors – powder coating. These doors are made of metal still covered with a special varnish that is sufficiently resistant to mechanical damage. Doors manufactured by this technology and with a veneer on many years remain perfect in appearance but in the case of outdoor installation is strongly recommended to make a small roof or canopy over them.

Characteristic difference elite steel doors from the normal is that they are tend to go together with internal insulation and rubber gasket double in size. Security door of this type do not miss not only uninvited guests, but outside sounds, and even contribute to the insulation. Elite doors of metal have a presentable appearance because of the external panels, but here they do not worsen their security functions. These metal doors received a recommendation to the assembly instead of the front doors in a luxury room. Original metal armored door made by individual design project or customer order. These armored door as characterized by high resistance to cracking, and at the same time have a set of elegant dekoratvnyh elements of the armored glass, metal, mirrors, items of artistic blacksmiths and other decorations. To the unique metal doors at the request of the buyer installs the various elements of the decor. Fireproof Security door. Metal doors of this sample must have a certificate and shall maintain fire and leak areas, but at the same time not interfere with the exit of people. In this case, There is a special design of metal fire doors, which allows the extreme conditions quickly enough to open from the inside.

Construction

The ideal solution – when forged items are already built into the project of a building or interior. In another case, it is advisable to contact us at the stage of rough finishes. There are several moments where a customer wants to establish a forged products, could help themselves and us. For example, during construction of stone pillars to install gates to prevent them from sagging, it is necessary in the middle of the column to establish a strong steel pipe to which are welded mortgages. This pipe is obkladyvayut brick, stone or any other building material. Dimensions of the mortgage must be at least 100×50 mm. Hear other arguments on the topic with Home Depot. To avoid subsequent sagging, mortgage tube (channel, I-section or something else) should go into the ground at 0.5m below the freezing ground.

Forged products from Dakrus.ru – it's always original works of art of blacksmithing. These things will serve not only you but also your descendants, passing from generation to generation. Dakrus company offers its customers the opportunity to choose between standard and exclusive designs. In any case, you select the highest quality and exclusivity, are inaccessible to so-called goods mass demand. Dakrus – a prestige good.

Construction Of The Turkish Bath (Hamam )

Turkish bath has heated floors, walls and couches. Hammam, who are renowned for exceptional comfort, built on the principle of the palm. That is five fingers – it’s five rooms, five bath niches. Area of 2 square meters and to infinity. In different niches – different temperature (from 70 to 100 degrees).

Here are some of them and there is not only physical but also spiritual purification. Jeff Flake has much to offer in this field. In general, we must admit that the technology of construction of such objects is quite difficult. Here Why do such work come from construction companies with experience in the business. However, there are no rules without exceptions. There have been cases where homeowners are even building a Turkish bath with his own hands, but usually it’s people artisans. For them first of all recall that during the construction of a Turkish bath as opposed to the construction of the Russian bath completely eliminated the use of wood. Applies only a stone. Say, the beds of marble, the ceiling and walls – of mosaic.

In the extreme case – a ceramic tile. We emphasize that the principle of how the hammam is under construction, remained the same, but today there are new materials. And basically this should be remembered when they approach decorating. Ways finishes can be varied. But their requirements are the same: thermal insulation and moisture of the room. Full hydraulic, acoustic and thermal insulation provided, for example, hard foam panel of which makes the power frame. In this case, and do not need additional finishing. Of the panels can be made not only the walls of Turkish bath, but the curved seat and even domed ceiling. This method of finishing guarantees that the air in the room will warm up faster. The load on the floor will be reduced and the construction of the pair will be reduced. True, such a finish is expensive. That’s because the construction of a hammam in this case involves use imported materials, which are now, let wedi panels and the like. Slab of polystyrene and then covered with a thermal loop of plastic pipe, and then steel mesh. Then finishing Finish the room with the plaster.